|
Reconfiguring the Linksys WET11 Wireless Ethernet Bridge
The
Linksys WET11 Wireless Ethernet Bridge is one of the finest products
on the market for simple connections to wireless networks.
Occasionally, this product will become reset and will not work with
our network until reconfigured. When operating properly and within
distance of the Sboca network, the WLAN light will be active (green).
Please verify that the X-II setting on the back of the switch is in
the X position. If your WET is within the Sboca wireless signal and the WLAN light is
not active, your WET11 will need to be reconfigured.
Please follow these simple instructions to reconfigure the WET11 to
see the Sboca Wireless Network.
|
To Reconfigure the Linksys WET11 Wireless Ethernet Bridge |
| |
Items need:
-
Linksys WET11 Wireless Ethernet Bridge
- Laptop or desktop computer with Ethernet/RJ45
connection
-
Ethernet
cable to connect WET11 to computer
|
Steps Involved
1.
Establish a static IP address for
the laptop or desktop computer
2. Reconfigure the WET11 to look for the Sboca
signal
3. Disable static IP address on laptop or desktop
Click
here for step-by-step instructions |
To return to the Sboca Support page,
click
here. |
